Hose solutions for fire fighting & emergency response
From municipal fire apparatus to flood disaster response — we supply high-pressure fire hoses, suction hoses, and large-diameter layflat for emergency water deployment.
Fire fighting applications
Choose your specific operation to see hose solutions matched to your working conditions.
Municipal fire hose
High-pressure fire hose for apparatus attachment, hydrant connection, and attack lines. Meets NFPA 1961 standards.
View solutions → Fire FightingFlood disaster deployment
Large-diameter layflat for emergency flood water transfer. Rapid-deployment, compact storage.
View solutions →Common challenges in fire fighting hose operations
We solve the problems that cost response teams time and compromise safety.
Fire hose abrasion on rough terrain
Standard fire hose jackets wear through quickly on concrete and rubble. Our double-jacket construction with abrasion-resistant treatment extends service life 2x in urban fire fighting.
Flood hose deployment speed
When flooding is rising, every minute counts. Our large-diameter layflat packs compact and deploys fast — one person can lay 100m in under 3 minutes.
Coupling compatibility with local hydrants
Fire departments often face mismatched coupling threads when connecting hoses to hydrants or other apparatus. We supply hoses with NH, NST, or Storz couplings and adapters — ensuring your hose connects to any hydrant in your district.
Field result: Egypt — Flood response deployment
How rapid-deployment layflat hoses enabled emergency flood water transfer in seasonal flash flooding.
Situation: A municipality in Egypt needed rapid-deployment flood hoses for seasonal flash flooding events. Standard layflat hoses required multiple personnel and disconnected couplings during deployment, wasting critical response time.
Solution: Deployed 8-inch large-diameter layflat hose with pre-attached couplings and compact folding design. The hose was stored in lightweight coils that could be carried by a single responder.
Outcome: 500m of hose laid across flood zones in 15 minutes — a 70% reduction in deployment time compared to conventional hoses. The municipality now stocks 2km of layflat for the rainy season.
Fire fighting hose FAQ
Yes, our municipal fire hoses are designed and tested to meet NFPA 1961 requirements for fire hose. This includes burst pressure testing, coupling retention, and kink resistance. We can provide a certificate of compliance with each shipment.
Our standard fire hose is service-test rated at 300 PSI with a minimum burst pressure of 900 PSI (3:1 safety factor). We also offer high-pressure variants rated up to 400 PSI service / 1200 PSI burst for applications requiring higher working pressures.
We manufacture flood deployment layflat hoses from 4-inch up to 12-inch diameter, with 6-inch and 8-inch being the most common for municipal flood response. Larger diameters allow higher flow rates — an 8-inch hose can move over 2,000 GPM at moderate pump pressure.
Need a hose for your fire fighting operation?
Tell us your pump specs and flow requirements. We'll recommend the right hose configuration with factory pricing.