Sewer jetting hose
High-pressure jetting hose for drain cleaning and sewer maintenance. Rated up to 4000 PSI with abrasion-resistant cover.
Best for: drain cleaning contractors, municipal sewer maintenance, industrial pipe cleaning
High-pressure jetting hose
Our high-pressure sewer jetting hose is built to withstand the extreme pressures and abrasive conditions of professional drain cleaning. The reinforced synthetic fiber construction delivers up to 4000 PSI working pressure with excellent flexibility for navigating tight pipe bends and long sewer runs.
The abrasion-resistant polyurethane or rubber cover protects against sharp debris, root fragments, and concrete pipe edges. The hose is designed for use on hydraulic and direct-drive jetter units and is compatible with standard sewer nozzles and tools.
Related municipal applications
Challenges solved by the right jetting hose
Jetting hose kinking in tight drains
When a jetting hose kinks inside a pipe, water flow stops and the hose can be damaged at the kink point. Our hose features a high-flex construction with anti-kink reinforcement that maintains its round bore even in tight 90-degree bends and through P-traps.
Cover abrasion from sewer debris
As a jetting hose is pushed and pulled through sewer pipes, sharp debris like broken pipe fragments, roots, and mineral scale abrade the outer cover. Our abrasion-resistant cover extends hose life by 2-3x compared to standard thermoplastic jackets in gritty sewer environments.
Abrasion at pipe entry point
The section of jetting hose that rubs against the edge of the manhole or pipe entry wears rapidly, creating a weak point that is prone to bursting under high pressure. Our sewer jetting hose features an extra-thick abrasion-resistant cover at the entry section, and we recommend alternating the hose lay direction to distribute wear evenly.
Case study: Municipal sewer maintenance fleet upgrade, UK
How abrasion-resistant jetting hose reduced replacement frequency by 60%.
Situation: A municipal sewer maintenance fleet in the UK was replacing jetting hose on their 9 truck-mounted units every 4-5 months due to cover abrasion from sharp debris and pipe scaling in aging cast iron sewer lines.
Solution: Upgraded all units to our heavy-duty abrasion-resistant jetting hose with polyurethane cover in 3/8 inch and 1/2 inch diameters. Standardized on 60-meter lengths with quick-connect end fittings.
Outcome: Hose service life extended to 14 months on average. Annual hose replacement costs reduced by 60% across the fleet. Crews reported fewer kinking issues and easier handling during sewer navigation.
Sewer jetting hose FAQ
For residential drain cleaning, 1500-2000 PSI is typically sufficient. For municipal sewer lines and commercial drains, 3000-4000 PSI is recommended to cut through roots, grease buildup, and scale. Our jetting hose is rated up to 4000 PSI with a 4:1 safety factor for reliable performance at maximum operating pressure.
Our high-pressure jetting hose is compatible with all standard sewer jetting nozzles including forward-jetting, rear-jetting, rotating, and chain knocker nozzles. The hose terminates in a standard 1/4 inch or 3/8 inch NPT male fitting for direct connection to most jetting nozzle assemblies.
With proper use and maintenance, our sewer jetting hose typically lasts 12-24 months in daily commercial service. Factors affecting hose life include operating pressure (higher pressure reduces life), the abrasiveness of debris being cleaned, and proper reeling/storage practices. Regular inspection for kinks and cover damage helps maximize service life.
Need sewer jetting hose for your fleet?
Tell us your operating pressure, hose diameter, length requirements, and jetter unit type. We'll recommend the right jetting hose with FOB pricing.